Lawton videos - by Video Site

Lawton replication

Length: 1:16
Rating Average: 4.00 from 3 people
View Count: 4084' favoriteCount='6
Author: kramana

Tags: electrolysis energy HHO hydrogen lawton meyer water

Lawton pulsed DC circuit replication. 12 volts 3 to 4 amps

Meyer Lawton revolution by Aquapulser

Length: 2:13
Rating Average: 5.00 from 4 people
View Count: 7217' favoriteCount='23
Author: kramana

Tags: energy free fuel gasoline HHO hydrogen hydroxy oil overunity peak petroleum water zeropoint

Demo runs of Lawton Replication (PDF D14) as per U.S. Patent 4,936,961. Pulsed 12 Volt DC. No inductors or VIC. http://aquapulser.com/research.html

uriah heep - wise man (john lawton)

Length: 2:55
Rating Average: 4.88 from 192 people
View Count: 137073' favoriteCount='445
Author: riosrogerio

Tags: heep john lawton uriah

video from john lawton era

Repaired Lawton Unit

Length: 5:20
Rating Average: 3.82 from 11 people
View Count: 3711' favoriteCount='8
Author: ZeroFossilFuel

Tags: HHO HOH Lawton PWM

For my friend John who bought a Lawton unit from Tom at PWMPOWER. What a joke.

Geoff Lawton - We Are The Weeds

Length: 4:53
Rating Average: 4.75 from 32 people
View Count: 4770' favoriteCount='55
Author: permascience

Tags: change climate conservation deserts geoff lawton permaculture sustainability water

Geoff Lawton "Tells it How It Is" and talks about the Jordan Project. For more information about Geoff and his work please visit; http://www.permaculture.org.au

Geoff Lawton's Permaculture Food Forest

Length: 1:35
Rating Average: 5.00 from 8 people
View Count: 3688' favoriteCount='34
Author: permascience

Tags: agriculture ecology food forest geoff lawton permaculture sustainability

Renowned international Permaculture teacher Geoff Lawton outlines the methods of designing and building your own food forest from conception to completion. The full video demonstrates the evolution of a food forest from day one through to a living 2,000 year old example still flourishing in the Middle East. The DVD will be available for purchase in September 2008 from: http://www.permaculture.org.au

Hensley/Lawton Band (Uriah Heep) Lady In Black 7 June 2008

Length: 7:18
Rating Average: 5.00 from 2 people
View Count: 2023' favoriteCount='2
Author: mettbrukernavn

Tags: 2008 Festival Heep Hensley Lawton live Rock Sweden Uriah

Live at Sweden Rock Festival 2008

Lawton D14 Test with Oxide Coating

Length: 1:10
Rating Average: 5.00 from 4 people
View Count: 4572' favoriteCount='18
Author: hdemartin

Tags: DC electrolysis hydrogen lawton meyer oxygen pulsed ravi splitting water

Single 4" cell, 304 stainless steel, 1.57mm gap. 1cm plastic straw segments used as spacers. Inner tube conditioned over 24 hours in calcium hydroxide solution (1/8 teaspoon Kalkwasser powder to 1 pint R.O. water). Beginning of conditioning took 12 volts at 1 amps, end of conditioning took 24 volts at .5 amps due to calcium oxide insulator depositing on cathode. This here is driven by the newer D14.pdf Lawton circuit with bifilar inductor. http://panaceauniversity.org/D14.pdf As you can see it produces gas with .26 Amps @ 12 Volts. Looks like much, but the bubbles themselves are tiny. Only real interesting thing is that the cell has self-voltage. When I disconnect cell from circuit and measure its potential, it drops quickly to 2 Volts but then takes 20 minutes to drop further to 1.5 Volts. The better the oxide insulator coating, obviously the more slowly voltage drops. Therefore in between signal pulses, there is a unipolar DC field between the tubes. In Stan Meyers' setup, I am guessing that this DC field is much higher and acts to unipolarly stress the water dielectric right at the point of breakdown. What happens there is that the tiny high voltage spikes going into the tubes actually raise this DC potential over successive spikes, then the gate shuts it off and lets the potential fall back down a bit. This might be to avoid arcing if the DC potential rises too high. In this video, that DC cell potential is only 2.96 volts, but that's because only 12 volts are going in from Lawton's circuit. Lawton's circuit is not a true Meyers replication. Meyer had the cell circuit electrically isolated through a 1:3 to 1:30 step up transformer (toroid) and employed some kind of resonance to get high voltage spikes pumping into the cells. The blocking diode in that case is what produces a flat DC charge across the cells, whereas the high frequency pulses ride atop the DC and goes right through the water cap (because capacitors pass high frequencies) and interacts with the bifilar charging chokes. The goal is to insulate the tubes, maintain a high DC potential between them via the blocking diode, and perhaps employ a flyback effect in the toroid transformer to have high voltages. Beware that the blocking diode makes this circuit not perform as a typical LC series oscillator. Also remember that Meyer used maximum potential and minimum current -- it was not pulsed DC-current electrolysis, it was high voltage DC with high voltage unipolar pulses atop this fed into a cell that optimally used distilled water and/or insulated cathodes. Meyer was all about dielectric breakdown of water due to intense E gradients, not loads of electrons marching through ripping and heating things up. I post this video here just to show that Lawton's circuit still does something regardless, and as others report does it better than conventional DC current electrolysis.

Water Fuel Cell 2007 (Meyer by Lawton)

Length: 0:32
Rating Average: 4.43 from 54 people
View Count: 108349' favoriteCount='209
Author: H2earth

Tags: Cell electrolysis energy Fuel hydrogen Lawton Meyer water

This clip shows a WFC with solid state circuitry, recently built in the UK by Dave Lawton and currently undergoing testing. It is using less than 60 Watts of input power, pulsed at 3 KHz.