Knifemaking Tuesdays Week 96 - Tormach Lathe delivery and installation

  • Length: 29:7
  • Rating Average: 5.0' max='5' min='1' numRaters='208' rel='http://schemas.google.com/g/2005#overall from people
  • View Count: 6322
  • Author: JohnGrimsmo

Tags:  

We recently bought Tormach's new 15L Slant-Pro lathe! This vid shows the delivery, installation, setup, my thoughts so far, as well as a bunch of random mach...

Choose Your CNC Adventure: Machining DIY Steam Engine Part with the Tormach PCNC Mill! Part 2

  • Length: 12:22
  • Rating Average: 5.0' max='5' min='1' numRaters='122' rel='http://schemas.google.com/g/2005#overall from people
  • View Count: 653
  • Author: NYC CNC

Tags:  

This part sent in by subscriber Chris and is a great example to kick off the "Choose Your CNC Adventure" with! We model the part in SolidWorks, program toolpaths in SprutCAM, grab a block...

Choose Your CNC Adventure: Machining DIY Steam Engine Part with the Tormach PCNC Mill! Part 1

  • Length: 21:1
  • Rating Average: from people
  • View Count:
  • Author: NYC CNC

Tags:  

This part sent in by subscriber Chris and is a great example to kick off the "Choose Your CNC Adventure" with! We model the part in SolidWorks, program toolpaths in SprutCAM, grab a block...

CNC Machining Steel Bracket with Tormach PCNC Mill - MFG@Home!

  • Length: 25:31
  • Rating Average: 4.9222355' max='5' min='1' numRaters='823' rel='http://schemas.google.com/g/2005#overall from people
  • View Count: 86724
  • Author: NYC CNC

Tags:  

Tormach PCNC 1100! Tormach PSG! Emco V13 Lathe! Solidworks! Sprutcam! A customer had a worn-out aluminum bracket used to drive a crank arm off a motor. Using...

Machining Erik's Volvo pulley on our Tormach PCNC1100

  • Length: 21:52
  • Rating Average: 4.8913045' max='5' min='1' numRaters='184' rel='http://schemas.google.com/g/2005#overall from people
  • View Count: 9330
  • Author: JohnGrimsmo

Tags:  

Here's a video we shot back in April 2014 and are just now getting around to uploading. We had to make a custom adapter pulley for Erik's 1983 Volvo 242 turb...

Tormach PCNC 1100 Cutting Demonstration: Aluminum

  • Length: 5:58
  • Rating Average: from people
  • View Count: 58136
  • Author: Tormach, LLC

Tags:  

Tormach PCNC 1100: http://goo.gl/a2dhPe A cutting demonstration on the Tormach PCNC 1100 Series 3 CNC mill. The workpiece used is Aluminum 6061-T6 stock. Flo...

Manufacturing At Home: Machining Large Aluminum Plate with Tormach PCNC 1100

  • Length: 33:46
  • Rating Average: 4.921147' max='5' min='1' numRaters='558' rel='http://schemas.google.com/g/2005#overall from people
  • View Count: 76852
  • Author: NYC CNC

Tags:  

Happy New Year folks! Had a customer send this job over and they were OK sharing it with you guys, so here's a quick video machining a large aluminum bracket...

Tormach 15L Slant-PRO Lathe Demonstration #1

  • Length: 5:48
  • Rating Average: from people
  • View Count: 5474
  • Author: Tormach, LLC

Tags:  

Tormach 15L Slant-PRO Lathe: http://goo.gl/5Mchwf This video demonstrates the Tormach Lathe cutting a lens stepup ring. Lathe Demo #2: https://www.youtube.co...

Page: 1 of 10060

Next Page